Wash Tech

Features

• A 5 horsepower, direct drive high pressure pump and wand assembly allow for efficient use of utilities and fast prepping of vehicles
• Diaphragm-type injection pump provides on demand prep solution injection into the high pressure wand
• Flow switch and timer allow the gun to automatically start and stop when the trigger of each wand is engaged or disengaged
• Dual nozzle tip wands allow for the user to switch between a 25 degree v-jet nozzle or a 0 degree nozzle during prepping to target different areas of the vehicle

Overview

The WashTools Single Prep Gun System is a self contained prep gun unit which houses a 5 horsepower motor directly coupled to a high pressure General pump.  The pump is capable of 6.5 GPM @ 1000 PSI and has over temperature and over pressure protection.  Also included with the unit is a chemical injection pump which allows wash solutions to be applied to the vehicle thru the high pressure wand.  A switch on the control box allows the gun to operate in a water only mode or a water with chemical injection mode.  A flow switch and timer in the control box allows the gun to be activated by simply pulling the prep wand trigger to activate the pump motor.  When the prep wand trigger is released, water flow will stop and the timer will then delay the time you set to turn the pump motor off.  The control contains (2) sets of dry contacts that can be used to signal motor starters to start each pump.  The motor starters are not included with the base prep gun unit, but are Each wand has (2) nozzles that can be easily toggled during prepping to switch between a v-jet or a 0 degree nozzle.